|
Post by cdwood2010 on Aug 28, 2018 0:30:31 GMT
That cut out for the air filter is pretty sweet. Can you modify it further maybe into a cold air feed?
Chris.
|
|
|
Post by grenade on Aug 28, 2018 2:03:03 GMT
I could. If I put a cover on the top of the filter and then made 1 larger hole in the core support- it would take only air in, from the front grill. I don't really want to cover it up though. This truck is crazy! I mean, it's like I'm building it for myself but someone else gets to pay for it. Very strange indeed. BUT- Very cool and fun at the same time
|
|
|
Post by grenade on Sept 5, 2018 1:34:32 GMT
Ok- I made a cold air intake... ISH. lol The Fan, fan shroud, the radiator and the factory Mustang trans cooler have been installed. Pipes connected. The fuel system has also arrived but I haven't gotten started on that yet. I got all the way to the end- the hood actually clears everything!
|
|
|
Post by grenade on Sept 5, 2018 21:24:45 GMT
|
|
|
Post by grenade on Sept 6, 2018 22:58:39 GMT
AND THEN: Probably too many beers to remember why these didn't make the last post. FUN! Back at it tomorrow.
|
|
|
Post by grenade on Sept 8, 2018 0:48:29 GMT
|
|
|
Post by grenade on Oct 16, 2018 12:28:31 GMT
Partially wired, fuel system is done- Not much left to do with this one, but--- Many things have happened, all good. Let's see if anyone can spot the subtle differences, aside from the new glass going in...
|
|
|
Post by manitou on Oct 16, 2018 21:09:57 GMT
Partially wired, fuel system is done- Not much left to do with this one, but--- Many things have happened, all good. Let's see if anyone can spot the subtle differences, aside from the new glass going in... One broom is taller but the other one is wider?
|
|
|
Post by grenade on Oct 16, 2018 22:25:56 GMT
Hahahahaha Yes, that's it hahaha Just wait until I post again tonight's updates lol
|
|