|
Post by cdwood2010 on Jul 30, 2018 22:34:25 GMT
So I accidentally bought another Cammy last week. It turned up today, and I scooted it straight into the garage. My plan was to keep it hidden for as long as possible. This afternoon the missus went in the garage to get something. She's not mentioned the "new" Cammy, so I'm guessing she thinks it to be the 1mz Cammy still parked on the far side of the garage. She's probably going to work it out eventually, especially when we kill both Cammys next weekend, and they are parked on the drive waiting for the scrap man. More soon!
|
|
|
Post by manitou on Jul 30, 2018 22:45:25 GMT
your missus has seen enough camrys to know the difference between a vz and a mz, she's waiting for the right moment to launch at you.
|
|
|
Post by byrney1984 on Jul 30, 2018 22:51:38 GMT
Hahaha. The fun of explaining. I bought the misses a Clogau bracelet that cost more than my camry. Just so she couldn’t moan about it. Moan she did ha. Whats your 3vz plans Chris? I’m on the look for a spare engine. Just incase mine go kaboom.
|
|
|
Post by manitou on Jul 30, 2018 23:16:11 GMT
Hahaha. The fun of explaining. I bought the misses a Clogau bracelet that cost more than my camry. Just so she couldn’t moan about it. Moan she did ha. Whats your 3vz plans Chris? I’m on the look for a spare engine. Just incase mine go kaboom. A Clogau? Isn't that something that chickens have? But yeah, a spare vz wouldn't be a silly thing to have if you are going to force feed yours nitros with a turbo!
|
|
|
Post by cdwood2010 on Aug 1, 2018 21:43:49 GMT
It's going on a pallet and up for sale. I'm like a cat lady when it comes to Cammys. 110k miles, seems sweet enough, old man car. It came with a full tank of fuel, a new cd player, and some spare front pads. Shame the calipers don't fit an MR2, they would stop a train. Which reminds me, got these for sale if they're of interest...... 4 Pot SX200 front calipers with adapters to SW20. Had them 3 years, given up ever getting around to fitting them....
|
|
|
Post by byrney1984 on Aug 1, 2018 22:00:13 GMT
Hmmmm I’m interested me old crazy pal. But what diac’s what need fitting? Supra I would guess. How much for them and how much for the engine. Might keep it as a spare or maybe forge it with Pauter 5vzfe rods and Wiseco 3vz pistons. Haha
|
|
|
Post by cdwood2010 on Aug 2, 2018 0:16:37 GMT
Yep, supra 323mm discs, they can be had at a fair price if you shop around. I'm open to sensible offers on the calipers etc. The 3vz is already on eBay for £850, the last one we had went for almost that and I'm throwing in a flywheel and a mount with this bad boy.
|
|
|
Post by byrney1984 on Aug 2, 2018 7:36:35 GMT
I’ll have a think on the calipers pal. £850 is a fair price. But too much for me for now. I have a LUK clutch kit that was sent me by mistake when buying a turbo clutch. Its been in the garage 12 months. Your welcome to it if you want to inculde it it your sale.
|
|
|
Post by manitou on Aug 2, 2018 9:02:13 GMT
I’ll have a think on the calipers pal. £850 is a fair price. But too much for me for now. I have a LUK clutch kit that was sent me by mistake when buying a turbo clutch. Its been in the garage 12 months. Your welcome to it if you want to inculde it it your sale. Is that the sort of clutch kit i'll need for my swap captain bodge? I'll buy it if its for sale, I went to my local supplier and they said they were all out of LUK, i'd be so lost without one.
|
|
|
Post by byrney1984 on Aug 2, 2018 10:00:58 GMT
Yeah it is mate. Its in a blue point box but is all stamped LUK. Your welcome to it if you want. I also a spare na flywheel that I machined on the miller to the camry PCD. Served my well for 12months until I upgraded it to a 3sgte one that I machined.
|
|
|
Post by byrney1984 on Aug 2, 2018 10:14:50 GMT
|
|
|
Post by manitou on Aug 2, 2018 22:03:31 GMT
Yeah it is mate. Its in a blue point box but is all stamped LUK. Your welcome to it if you want. I also a spare na flywheel that I machined on the miller to the camry PCD. Served my well for 12months until I upgraded it to a 3sgte one that I machined. Cool, how much is a fair price for it?
|
|
|
Post by cdwood2010 on Aug 3, 2018 1:49:11 GMT
Wow, thanks for the offer, but Manitou needs one for his 1MZ build we have been helping with! I've fitted LUK N/A clutches to 3VZ and 1MZ and they do just fine for regular hooning. Feel free to sort it with Alan directly. Flywheel would be very cool too, all you need then are 8 bolts for the fly and a set for the clutch cover and you are well on your way! Chris.
|
|
|
Post by cdwood2010 on Aug 7, 2018 7:12:32 GMT
|
|